 View Large
|
Product Name : | cast iron surface plate |
| Product Origin : | China | |
| Product Category : | Breadboards | |
| More Products : | Click here! | |
| Contact Details : | shanghai chenghua machinery co.,ltd | |
| Product Code : | shchjx |
| Product Name | Three Dimensional Surface Marking Test Calibration Machine Cast Iron floor plate casting |
| Brand Name | Chenghua |
| Key Specification | 1.Material:HT200-HT400,cast iron 2.Standard:GB/T22095-2008 3.Specification:From 100*100 up to 8000*3000mm(Special specification also can be made in accordance with the buyer's request) 4.Surface treatment:Scrape 5.Performance: lineation , test ,rubbing ,measurement |
| Working Surface Area | V, T, u-shaped slot and hole, long holes, etc |
| Hardness | HB170-240 |
| Foundry Process | Sand Casting & Centrifugal Castings |
| Moulding Type | Resin Sand Moulding |
| Painting | Primer Painting |
| Dimensions | All Type |
| Certifications | ISO9001:2008, ISO14001-2008 |
| Foundry Experiences | 30 years |
Cast Iron Surface Plate Technical parameters:
| Specification(mm) | Roughness permissible error(μm) | ||||
| Grade 0 | Grade 1 | Grade 2 | Grade 3 | Finish plane | |
| 100×100 | 4 | 8 | 26 | ||
| 200×200 | 5 | 10 | 20 | ||
| 300×200 | 6 | 12 | 24 | ||
| 300×300 | 6 | 12 | 24 | ||
| 400×300 | 6 | 12 | 24 | ||
| 400×400 | 6 | 12 | 24 | ||
| 600×400 | 7 | 14 | 28 | ||
| 600×500 | 7 | 14 | 28 | ||
| 800×500 | 8 | 16 | 32 | 80 | |
| 900×600 | 8 | 16 | 32 | 80 | |
| 1000×750 | 9 | 18 | 36 | 90 | |
| 1000×1000 | 10 | 20 | 39 | 96 | |
| 1500×1000 | 12 | 25 | 48 | 120 | |
| 2000×1000 | 26 | 52 | 129 | ||
| 2000×1500 | 56 | 140 | |||
| 2000×2000 | 60 | 152 | 230 | ||
| 2500×1500 | 64 | 152 | 230 | ||
| 2500×2000 | 68 | 168 | 248 | ||
| 3000×1000 | 174 | 248 | |||
| 3000×2000 | 184 | 275 | |||
| 3000×3000 | 210 | 300 | |||
| 4000×1000 | 210 | 300 | |||
| 4000×2000 | 219 | 310 | |||
| 4000×3000 | 240 | 360 | |||
| 5000×2000 | 255 | 375 | |||
| 5000×3000 | 287 | 420 | |||
| 6000×2000 | 293 | 430 | |||
| 6000×3000 | 308 | 460 | |||
| 8000×2000 | 370 | 520 | |||
| 8000×3000 | 382 | 570 | |||
Introduction:
The Cast Iron Surface Plate is called Working Platform(working plate),Worktable.
The gross structure of Cast Iron Surface Plate (worktables) is divide into box type and rib type.
The shape of working surface is rectangle, square and roundness. According to the precision
machining,It’s divided into finish plane and scraping.
Special Provision
We provide special tapped holes and t-slots at the top working surface for fixing work or measuring instruments at extra cost. These are offered as per customers’ specifications. welcome visit our factory and check our cast iron plate.
Installation and adjustment
When used surface plate ,you should first installation debugging,then you can use it . No significance work on surface plate if they aren't properly positioned .Surface plate should setup on level off, firm without shock place .please first put the pad iron down ,then put the surface plate on the pad iron ,removal the wooden case and oil . Measurement with the levelness of the surface plate ,when the surface plate isn't level ,please adjust the pad iron .( In the process of adjusting attention to safety)
Product pictures
Application
Cast iron surface plate mainly used for machinery, machine tool board manufacturing, electronics, electric power, all kinds of industries, Most commonly used in industrial production, 95 percent of the total output
Usage
(1) Suitable for various inspections and benchmark planes for accuracy measurement.
(2) Used widely as the measurement benchmark for machine tool inspection and to inspect the dimension accuracy or running difference with the function of performing precise lineation.
(3) It is an essential measuring tool in machine manufacturing.
Material and Processing
The material is high strength cast iron HT200-400, and the rigidity of working face reaches HB170-240. It goes through twice of man work processing (man work anneal by 600-700° with natural validity of 2-3 years) in order to make the product stable in accuracy and good in grinding resistance.
Precision:
It is in accordance with the procedure of state standard for measurement and inspection, which is divided into four levels of 0-3.
Price:
Product Attachment
| File Name : 德标DIN650 T型槽尺寸标准.png |
| File Size : 31.95KB File Type : image/png |
