Ceramic(Ferrite) Magnet is manufactured from oxide materials using powder metallurgical process.

Our huge inventory of ceramic magnet can ensure us to supply assortment of goods
to choose from, which includes arc segments, ring types, discs, blocks, bars and more, in a variety of sizes and shapes. This selection includes all grades, oriented and non-oriented, bi-pole and multi-pole magnets.

Our products assortment includes arc segments, ring types, discs, blocks, bars and
more. This selection includes all grades, oriented and non-oriented, bi-pole
and multi-pole magnets. Based on several decades of production history, our company have more than 1000 kinds of existing products, most of them can be delivered in a short time. We can also make unusual shapes according to customer's requirements, and the shapes can be made by means of molding, cutting, grinding and drilling.

We have rich experience in supplying Europe moter users, and we are TS16949 certified. We'd pleased to supply full set of PPAP reports with samples to you.

Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium
Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.

The feature of low recoil permeability, along with the high coercive force,
makes them highly resistant to demagnetizing fields. In addition, their relatively
low specific density and economical cost are also very attractive to the magnet
designers. When designing the ferrite magnets for a particular application,
primary consideration should be given to its shape limitation due to the powder
metallurgical manufacturing process and the temperature dependence of ferrite materials.

Ferrite Magnets has good anti-corrosion performance, no surface treatment
needed. There are two manufacturing process for ferrite magnets: Dry Process
& Wet Process. By dry process, can produce isotropic & anisotropic magnets; by
wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets
are not oriented and can be magnetized in any direction; anisotropic ferrite magnets
are different, they are all oriented in the manufacturing direction, and should
be magnetized in the direction of orientation. For dry process, the tool can
be changed and developed easily, while for wet process, it is complicated to
change the tool and the tooling charge is much higher. At present, we have put our
emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications .